ABB 250-500V 50/60HZ ENCLOSED 7.5kW DOL STARTER
DRAF 09 to DRAF16 enclosed direct-on-line starters. Up to 7.5kW and 10hp, protected thermal overload relays AC operated.
Enclosed direct-on-line starters are used for controlling 3-phase asynchronous motors up to 690 V AC.
Each Starter is delivered assembled and wired. It contains:
- IP66 and type 4X plastic enclosure with double insulation, equiped with:
- 1 green flush "I" ON button and 1 red protruding "O" OFF/RESET button.
- 4 cable inlets and outlets via knockouts.
- 1 AF 3-pole contactor with holding contact|
- 1 CB5-10 start contact block.
- 1 PE and 1 neutral terminal.
Control Supply Wiring:
IEC starters type: phase to phase, separate supply or phase to neutral
UL starters type: separate supply.
TF42 thermal overload relay (not included in price) to be ordered separately and choose according to motor's nominal current.