3-pole, front operated, base mounted, DIN-rail mountable switch-diconnector / non-fusible diconnect switch with protected clamp terminals, handle and shaft are not included.Rated Operational Current AC-21A (I_e):(380 ... 415 V) 80 A
(500 V) 80 A
(690 V) 80 ARated Operational Current AC-22A (I_e):(380 ... 415 V) 80 A
(500 V) 80 A
(690 V) 80 ARated Operational Current AC-23A (I_e):(500 V) 58 A
(380 ... 415 V) 75 A
(690 V) 20 ARated Operational Power AC-23A (P_e):(380 ... 415 V) 37 kW
(500 V) 37 kW
(690 V) 18.5 kWConventional Free-air Thermal Current (I_th): q = 40 °C 80 AConventional Thermal Current (I_the): Fully Enclosed 80 ARated Impulse Withstand Voltage (U_imp): 8 kVRated Insulation Voltage (U_i): 750 VRated Operational Voltage: 750 VRated Short-Circuit Making Capacity (I_cm): (690 V AC) 1.4 kARated Short-time Withstand Current (I_cw): for 1 s 1 kiloampere rmsPower Loss:at Rated Operating Conditions per Pole 2.8 W
at Rated Operating Conditions per Pole 4.5 WPollution Degree: 3Handle Type: Knob, Handle and shaft not includedSwitches Operating Mechanism: Mechanism on Top of the SwitchDistance Between Phases: StandardPosition of Line Terminals:Top In - Bottom Out
Bottom In - Top OutOperating Mode: Front operatedStandards: IEC 60947-3, UL 508 / CSA C22.2 NO.14Special Functions: NoMounting Type: Base mountingNumber of Poles: 3Cable Cross-Section: 1.5 ... 35 mm²Terminal Type: Screw TerminalsTightening Torque: 2 N·m

Special Pricing

There is no speical pricing for this product.

	datasheet

No Recent Purchases

Type	Category Name
Category	ABB Switch Disconnectors

There are no features for this product

No features for this product

There are no videos for this product