Screw Clamp Terminal 6mm
Save space by connecting conductors up to 6 mm² (without insulated ferrule, CB certified) 10 AWG in just 6 mm 0.236 in spacing.
Perfectly adapted to solar applications: voltage is rated 1000 V AC / DC IEC.
Rated Cross-Section: 6 mm²
Spacing: 6 mm
Connection Type: Screw clamp
Function: Feed-through
Number of Levels: 1

Connecting Capacity Main Circuit:
Screw Clamp / Flexible 1x 0.2 ... 6 mm²
Screw Clamp / Flexible 2x 0.2 ... 2.5 mm²
Screw Clamp / Rigid 1x 0.2 ... 6 mm²
Screw Clamp / Rigid 2x 0.2 ... 2.5 mm²
Screw Clamp / With Insulated Ferrrule 1x 0.22 ... 4 mm²
Screw Clamp / Without Insulated Ferrule 1x 0.22 ... 4 mm²
Screw Clamp / With Twin Ferrule 2x 0.22 ... 2.5 mm²
Gauge Type: A4-B3
Rated Current (I_n): Main Circuit 41 A
Rated Short-time Withstand Current (I_cw): for 1 s 720 A
Rated Voltage (U_r): 1000 V
Rated Impulse Withstand Voltage (U_imp): 8000 V
Dielectric Test Voltage: 2200 V
Pollution Degree: 3
Power Loss: 1.3 W
Degree of Protection: acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20
Insulation Material: Polyamide
Mounting on DIN Rail:TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715
TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
Wire Stripping Length: 10.5 mm
Recommended Screw Driver: 4 mm

Special Pricing

There is no speical pricing for this product.

	datasheet

No Recent Purchases

Type	Category Name
Category	ABB Terminals

There are no features for this product

No features for this product

There are no videos for this product